Physical Description - Crestron CNX-DVP4 Operation Manual

Digital Video Processor Crestron CNX-DVP4

Physical Description

The CNX-DVP4, shown in the following illustration, is housed in a black metal
enclosure. All RS-232, video, LAN, and Cresnet connectors are on the back panel.
The supplied racking mounting ears can be attached at the shorter sides of the unit.
Two holes per ear are for inserting the rack mounting screws. The ears can be
removed to reduce the size of the CNX-DVP4. If the ears are removed, the provided
rubber feet can be mounted on the under side to stabilize the unit on a flat surface.
The front panel has a PWR (green) LED and a NET (yellow) LED. The PWR LED
illuminates when power is applied to the unit. When functioning as a Master, the
NET LED blinks when transmitting or receiving data from Cresnet. When
functioning as a slave, this LED blinks when the unit is polled. This will generally be
frequent enough to appear to be on steady.
CNX-DVP4, Front and Back Views
6 • Digital Video Processor: CNX-DVP4
Operations Guide – DOC. 8170A