Simpl Windows - Crestron CNX-DVP4 Operation Manual

Digital Video Processor
78 • Digital Video Processor: CNX-DVP4
Project 2
1. Create a project, name it Page Flip for CNXDVP4 and select CNX-DVP4 as
the panel type.
2. Create a new page, name it Logo, and select a logo graphic for the
background. Assign a Join number of 1 in "Page Properties".
3. Create Page 2 and name it Camera Video 1A.
4. Assign Join number of 2 in "Page Properties".
5. Place a video window on this page.
6. Select Full Screen, Video Input 1A and Zoom in "Video Properties".
7. Create Page 3 name it Tune Video 1B.
8. Assign Join number of 3 in "Page Properties".
9. Place a video window this on page.
10. Select Full Screen, Video Input 1B and Zoom in "Video Properties".
11. Create Page 4 and name it DVD SVHS 2.
12. Assign a Join number of 4 in "Page Properties".
13. Place a video window on this page.
14. Select Full screen, S-Video Input 2 and Zoom in "Video Properties".
15. Create Page 5 and name it Power Point RGB 1.
16. Assign Join number of 5 in "Page Properties".
17. Place a video window on this page.
18. Select Full Screen, DVI/RGB 1 and Zoom in "Video Properties".
19. Create Page 6 and name it Guest Speaker RGB 2.
20. Assign a Join number of 6 in "Page Properties".
21. Place a video window this on page.
22. Select Full Screen, DVI/RGB 2 and Zoom in "Video Properties".

SIMPL Windows

One project is created and compiled in SIMPL Windows. This program establishes
the touchpanel interface.
1. Create a project and name it Page Flip Master Mode.
2. Drag and drop a CNX-DVP4 from the Device Library | Control Systems
folder to System Views.
3. Drag and drop a TPS-5000 from the Touchpanels folder to Cresnet Units in
System Views.
4. Click (Program) to open Program View.
5. Double click Slot-01: Touchpanel Interface to open symbol.
6. Program the symbol according to the graphic on next page.
Crestron CNX-DVP4
Operations Guide – DOC. 8170A