Crestron CNX-DVP4 Operation Manual page 39

Crestron CNX-DVP4
Operations Guide – DOC. 8170A
NOTE: Select Lock Sync after the size and position adjustments.
4. Adjust vertical line pattern to look flat and uniform (no color shades, dark
areas, etc.).
5. Select a vertical/horizontal pattern to display in RGB window, and select
Size. The size buttons appears (refer to the following graphic).
Size Buttons
6. Adjust size as desired.
NOTE: You may need to perform the Lock Sync adjustments again (steps 4 and 5
above) after adjusting the size.
7. Select a vertical/horizontal line grid to display in RGB window, and select
Position. The position buttons appear (refer to the following graphic).
Position Buttons
8. Adjust position as desired.
9. Select a color bar to display in RGB window, and select Color. The Color
buttons appear (refer to the following graphic).
NOTE: You may need to compare color bar and gray scale test patterns (refer to
steps 10 and 11) to determine the correct adjustment.
RGB Color Buttons
The Show Buttons controls the translucency of the buttons.
The Video Window button resizes the current window so that you can see
the edges of the window.
10. Adjust color as desired.
NOTE: Crestron recommends that you use a gray scale test pattern to check for any
color in the gray pattern of the screen.
11. Select a gray scale test pattern to display in RGB window, and check for
any color in gray patterns.
12. Adjust as desired, and then return to the MAIN MENU.
Digital Video Processor
Digital Video Processor: CNX- DVP4 • 33