Rules For Backgrounds, Video Windows, Objects And - Crestron CNX-DVP4 Operation Manual

Digital Video Processor
60 • Digital Video Processor: CNX-DVP4
Reveal
Reveal Selection
The reveal effect allows duration and direction settings.
Increases are made in 1/10 sec. increments, i.e. a value of 50 x 1/10 = 5 sec.
VIDEO SOURCE EFFECT
Reveal
East
South
West
North
NOTE: You can override fixed transitions and durations by assigning an analog join
number to the transition or duration in VT Pro-e. Also, in SIMPL Windows, create a
project using analog initializers to change the transitions and/or durations. An analog
transition or duration does not take effect until a new source is selected or a new
page is drawn.

Rules for Backgrounds, Video Windows, Objects and

Subpages
The following are the rules for layering backgrounds, video windows and objects in
a CNX-DVP4 VT Pro-e project.
Backgrounds – A background on a page is always the back layer. It cannot be
moved in front of video windows or objects.
Video Windows – Video windows are always on top of backgrounds. They cannot
be moved in front of objects.
Objects (buttons, etc.) – Objects are always on top of video windows and
backgrounds. They cannot be moved behind video windows and backgrounds.
Subpages – A subpage background is always in the back layer. It does not move in
front of the video window on the main page, but is in front of the main page's
background when it appears. Objects are always on top.
Crestron CNX-DVP4
DIRECTION VALUE
-
1230
1231
1232
1233
Operations Guide – DOC. 8170A
DURATION VALUE
0-100