Table of Contents
Advertisement
Crestron CNX-DVP4
Operations Guide – DOC. 8170A
Computer RS-232 Port Menu
NOTE: Make sure these settings match the Port Settings for RS-232 in Viewport.
After parameters have been set, select the Save and Return button, located at the
bottom right corner of the COMPUTER RS-232 PORT MENU.
Standby Timeout
STANDBY TIMEOUT, located at the middle of the SYSTEM SETUP MENU can
turn off the display when it is inactive for a specified time frame (minutes). When
the display is activated, the last screen shown reappears. Minutes can vary from 0 to
120, where 0 disables the timeout. 0-10 is adjustable in 1-minute increments. 20-120
is adjustable in 10-minute increments. DOWN and UP buttons decrease and increase
the timeout, respectively.
Digital Video Processor
Digital Video Processor: CNX- DVP4 • 27
Advertisement
Table of Contents
Troubleshooting
