Slave Mode - Crestron CNX-DVP4 Operation Manual

Crestron CNX-DVP4
Slave Mode Example
IR emitter
VCR
Touchpanel
Other
Ethernet
Devices
Operations Guide – DOC. 8170A

Slave Mode

In Slave Mode, the CNX-DVP4 operates as either a Cresnet or Ethernet device as
part of a 2-series control system.
In this simplified example, the CNX-DVP4 is part of a control system that includes
IR, RS-232 serial, Cresnet and Ethernet devices. The touchpanels operate the CNX-
DVP4 through the PRO2.
NOTE: The CNX-DVP4 can only be controlled by a 2-Series control system.
NOTE: Host Control System version 2.006 or later is required if the CNX-DVP4 is
operated as a slave. If operated as a slave from another CNX-DVP4, then version
2.006 or later is required.
NOTE: The slave mode example shows the CNX-DVP4 as a Cresnet device.
PRO2
Serial
Devices
Ethernet
Beta deck
DVD player
PC SVGA
LAN/WAN
Digital Video Processor
Cresnet
Touchpanel
CNX-DVP4
RS-232
Control
Video Input
Video Inputs
DVI/RGB
Output
Digital Video Processor: CNX- DVP4 • 5
Other
Cresnet
Devices
Power Supply
24VDC
Video Input
Video camera
Plasma screen