Crestron CNX-DVP4 Operation Manual page 95

Crestron CNX-DVP4
Operations Guide – DOC. 8170A
Detail View in SIMPL Windows
8. Select CNX-DVP4 Mouse/Serial Control. This adds the icon to slot 1
Mouse/Serial Control.
9. Assign a label to the touchpanel serial join number assigned in VT Pro-e and to
the Slot-01.1 Mouse/Serial Control Crestron Mouse.
10. Compile program and download to control system.
11. Establish communication with the touchpanel in Viewport and add the new
Device ID to the IP Table of the touchpanel.
ADDM 3 134.149.10.142 4
Where:
ADDM is command to add Ethernet devices to the IP Table of the
touchpanel.
3 is the CIP ID address of the touch panel in SIMPL Windows.
134.149.10.142 is the IP address of the Control system.
4 is the Device ID we added in VT Pro-e.
NOTE: When you set up for this mode, you can still have another mouse device
plugged into the Touchscreen Mouse port and have it control the CNX-DVP4, for
example: Micro touch, Elo Touchsystems, Microsoft mouse etc.
Digital Video Processor
Digital Video Processor: CNX- DVP4 • 89