Dvi, Rgb And Video; Diagnostics Menu; Video Output Setup Settings - Crestron CNX-DVP4 Operation Manual

Digital Video Processor
28 • Digital Video Processor: CNX-DVP4

Diagnostics Menu

Use this menu to initiate the touchscreen test and enable/disable the Ethernet.
Press the About button to display the current firmware version information.
Diagnostics Menu

DVI, RGB and Video

DVI, RGB and Video setup options on the MAIN MENU allow the user to adjust
both input (from a video source) and output (to a display device) video for optimal
performance. Refer to "Hardware Hookup" on page 16 for proper video connections.
Refer to "Appendix D: Output DVI Video from PC to CNX-DVP4" on page 82 for
important information on DVI video.
NOTE: Crestron recommends setting up the output prior to setting up the inputs.

Video Output Setup Settings

1. Select DVI, RGB and Video from the MAIN MENU to open the setup
options.
Setup Options
2. Select the Check Output button to open the RGB/DVI resolution and sync
options.
NOTE: The Check Output button is used to adjust the display device (using grid
test patterns) to the CNX-DVP4 output, and to set the CNX-DVP4 output resolution.
The output of the CNX-DVP4 should always match the native resolution of the
display device.
Crestron CNX-DVP4
Operations Guide – DOC. 8170A