Table of Contents
Advertisement
2. In the left pane, select an automation device.
3. Modify these fields:
•
IP Address—The IP address of the automation device.
•
Port—The port used by the automation device to communicate with the projector.
•
Username—The username used to access the automation device.
•
Password—The password used to access the automation device.
•
Keep Alive Message—The message value that is sent to the automation device to ensure
the projector is not disconnected when inactive.
•
Keep Alive Interval (ms)—The time interval (in microseconds) for sending the Keep Alive
Message to the automation device.
4. Tap Save.
Removing an automation device from your
auditorium
Remove an automation device when it is no longer required, or it has been physically removed from
the theater.
1. In the left navigation menu, tap Automation > My Auditorium Devices.
2. In the left pane, select an automation device.
3. Tap Delete.
4. To confirm the deletion, tap Delete.
Creating a new playlist trigger
Create new playlist triggers to activate an automation device in a playlist.
1. In the left navigation menu, tap Automation > Device Input Triggers.
2. Tap the Playlist Trigger tab.
3. Tap + New Playlist Trigger.
4. Complete the Name, Device Source, and Resume Playback On fields.
5. Tap Add.
Editing existing playlist trigger settings
Edit playlist trigger settings to change the playlist trigger behavior.
1. In the left navigation menu, tap Automation > Device Input Triggers.
2. Tap the Playlist Triggers tab.
3. To the right of the playlist trigger you want to edit, tap Edit.
4. Edit the playlist trigger settings.
CP2308 User Guide
020-102535-03 Rev. 1 (08-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Automation
80
Advertisement
Table of Contents
