V.25Bis Modem - GE Multilin MIB Instruction Manual

APPENDIX B B.2 V.25BIS MODEM
B.2V.25BIS MODEM
ENERVISTA MII SETUP software allows the modem making the call to accept V.25bis commands. In this case, the
modem on the relay side could be either HAYES or V.25bis, as it will not need to process any relay command.
The configuration of this kind of modem is performed by means of microswitches that set its operation. This way, the
software window for entering the modem initiation commands will only be operative if a HAYES modem has been
selected.
B
GEK-106426A MIB High Impedance Bus Differntial Relay B-3