Errors - GE Multilin MIB Instruction Manual

APPENDIX A
A.7ERRORS
When any of the previous commands produce an error in the slave the following frame is received:
ADDRESS
01H
We can receive the following values in the error code field:
GEK-106426B
FUNCTION + 80 H COD. ERROR
90H 07H
:
01 ILLEGAL FUNCTION
02 ILLEGAL DATA ADDRESS
03 ILLEGAL DATA VALUE
04 SLAVE DEVICE FAILURE
05 ACK.
06 SLAVE BUSY
07 NEGATIVE ACKNOWLEDGE
08 MEMORY PARITY ERROR
MIB High Impedance Bus Differntial Relay
A.7 ERRORS
CRC
0DC2H
A
A-21