If You Replace The Document Scanner Unit Or Cis Unit; Set The Cis Type (Maintenance Mode 59); Acquire Black And White Level Data (Maintenance Mode 55); Check Scanning - Brother DCP-J552DW Service Manual

3

IF YOU REPLACE THE DOCUMENT SCANNER UNIT OR CIS UNIT

<Operations>

3.1 Set the CIS Type (Maintenance mode 59)

3.2 Acquire Black and White Level Data (Maintenance mode 55)

3.3 Check Scanning

<Requirements>
(1) USB flash memory or SD card: 1 piece
(2) USB cable: 1 piece
(3) Create a temporary folder in the PC's C drive (Windows
(4) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(5) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the temporary folder in the C drive. Extract the
copied file and install it. Refer to
PRINTER DRIVER"
(6) ADF Copy Chart Data File
3.1 Set the CIS Type (Maintenance mode 59)
Refer to Chapter 5 "1.3.20 Checking of CIS Travel and Specifying of CIS Type (Maintenance mode
59)" for details on the execution.
After execution, install the firmware in Step 1.3 when "PLS UPDATE PROG" is displayed on the
LCD.
3.2 Acquire Black and White Level Data (Maintenance mode 55)
Refer to Chapter 5 "1.3.17 Acquisition of White/Black Level Data and CIS Scanner Area Setting
(Maintenance mode 55)"
3.3 Check Scanning
To make a final check after replacement, check a copy of an ADF copy chart.
Refer to "1.16 Check Scanning and Printing"
copy chart.
"APPENDIX 3. INSTALLING THE MAINTENANCE
for details on the installation.
for details on the execution.
in this chapter on how to acquire a copy of the ADF
4-18
®
XP or later).
Confidential