Adjustment Of Ruled Lines (Maintenance Mode 65); Update The Paper Feeding Correction Values (Maintenance Mode 58); Margin Adjustment In Borderless Printing (Maintenance Mode 66); Write Head Calibration Data (Maintenance Mode 02) - Brother DCP-J552DW Service Manual

2.5

Adjustment of Ruled Lines (Maintenance mode 65)

Refer to the adjustment of ruled lines in
Ruled Lines (Maintenance mode 65)"
2.6

Update the Paper Feeding Correction Values (Maintenance mode 58)

Refer to Chapter 5 "1.3.19 Updating of Paper Feeding Correction Value (Maintenance mode 58)"
details on the execution.
2.7

Margin Adjustment in Borderless Printing (Maintenance mode 66)

Refer to Chapter 5 "1.3.24 Margin Adjustment in Borderless Printing (Maintenance mode 66)"
details on the execution.
2.8

Write Head Calibration Data (Maintenance mode 02)

Refer to Chapter 5 "1.3.2 Creating of Head Calibration Data and Writing it into Flash ROM
(Maintenance mode 02)"
2.9

Check Printing

In "1.16 Check Scanning and Printing"
values", "Adjustment of ruled lines", and "Margin Adjustment in Borderless Printing" for details on
the execution.
Chapter 5 "1.3.23 Adjustment of the Vertical Print Lines/
for details on the execution.
for details on the execution.
of this chapter refer to "Update the paper feeding correction
4-16
for
for
Confidential