Brother DCP-J552DW Service Manual page 187

Assembling Note
When installing the carriage PCB ASSY, route the carriage flat cable as refer to
•
this chapter.
• When replacing the carriage PCB ASSY, remove the flat core from the old carriage PCB ASSY.
After attaching the old flat core to the new flat cable, attach the sponge to the leading edge of the
flat cable.
Head flat cable
Carriage PCB ASSY
Film
Carriage flat cable
Upper cover
Remove by pulling the lock
Opening
Boss
Head flat cable
3-70
Head/carriage unit
Carriage PCB
ASSY
Section 7-7 in
Lock spring
Head/carriage unit
(3_095)
Confidential