If You Replace The Head/Carriage Unit - Brother DCP-J552DW Service Manual

2

IF YOU REPLACE THE HEAD/CARRIAGE UNIT

<Operations>
2.1 Update the Head Property Data (Maintenance mode 68)
2.2 Supply Head Ink (Maintenance mode 76)
2.3 Check Head Nozzles (Maintenance mode 09)
2.4 Adjust the Head/carriage Unit Inclination
2.5 Adjustment of Ruled Lines (Maintenance mode 65)
2.6 Update the Paper Feeding Correction Values (Maintenance mode 58)
2.7 Margin Adjustment in Borderless Printing (Maintenance mode 66)
2.8 Write Head Calibration Data (Maintenance mode 02)
2.9 Check Printing
2.10 Obtain machine information (instruction to the end user)
<Requirements>
(1) USB flash memory or SD card: 1 piece
(2) USB cable: 1 piece
(3) Create a temporary folder in the PC's C drive (Windows
(4) Service setting tool (brusbsn.zip)
Make a copy of the Service setting tool in the temporary folder in the C drive. Decompress the
file and execute "brusbn.exe" by double-clicking on it.
(5) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(6) Maintenance driver (MaintenanceDriver.zip)
Make a copy of the maintenance driver in the folder created in the C drive. Extract the copied
file and install it. Refer to
DRIVER"
(7) Data files of print patterns
"APPENDIX 3. INSTALLING THE MAINTENANCE PRINTER
for details on the installation.
®
XP or later).
4-11
Confidential