Retrieving The Equipment Log Information - Brother DCP-J552DW Service Manual

2.3

Retrieving the Equipment Log Information

<Function>
This procedure retrieves the log information from the machine to the connected PC as electronic
data.
<Operating Procedure>
(1) Turn on your PC.
(2) Create an arbitrary folder in the C: directory and save the readback tool (rb2k03.exe) and PJL
command file (brmainten_77.pjl) in that folder.
Note: The rb2k03.exe file is available only in Windows
(3) Switch the machine to the maintenance mode. (Refer to
(4) Connect the machine to your PC using a USB cable.
(5) On the PC, start Command Prompt and change to the directory where the readback tool is
located.
(In the example below, a "SendPJL" folder is created in the "C:" directory and the readback tool
is saved in that folder.)
(6) In Command Prompt, type "rb2k03.exe brmainten_77.pjl brmainten_77.txt /T3" and press the
Enter key. (Be sure to enter a space to the points marked with an asterisk "*" shown below.
rb2k03.exe*brmainten_77.pjl*brmainten_77.txt*/T3 Otherwise, an error occurs.)
brmainten_77.txt is created in the arbitrary folder.
(7) In Excel, open the created header/footer and delete header/footer added by the PJL stipulation.
®
XP.
Section 1.1
5-79
in this chapter)
Confidential