Error Messages - Brother DCP-J552DW Service Manual

3.2

Error Messages

First Line
B&W 1-sided Print
Only Replace Ink
BT Call Sign On
(UK only)
Cannot Detect
Cannot Detect Ink
Volume
Cannot Print Replace
Ink
Check for a Printable
Disc
Comm.Error
Connection Fail
Cover is Open.
Data Remaining in
Memory
Disc Jam (Front)
Disc Jam (Rear)
Disc Tray did not
Feed
Disc Tray hits at the
back
Disconnected
Document Jam
DR Mode in Use
Failed to detect the
original
High Temperature
Status
Ink ejection has reached the specified number of
times when the ink remaining sensor detects that
the ink replacement period is approaching. Only
black printing is possible.
The receiving mode cannot be changed since the
BT Call sign is ON.
The ink cartridge cannot be detected properly.
The ink volume cannot be detected properly.
Ink ejection has reached the specified number of
times when the ink remaining sensor detects that
the ink replacement period is approaching.
The disc size is incorrect or there is no disc loaded
on the disc tray.
A problem occurred in fax communication.
The receiver fax cannot set Polling.
An open scanner cover was detected. An open ink
cover was detected.
Data cannot be processed since the memory is
full.
The disc tray is jammed. (Front)
The disc tray is jammed. (Rear)
The disc tray is not set in the disc guide.
The disc tray collided with an obstacle at the back
of the machine.
The receiver's fax machine stopped.
The document scanning sensor detected a
document jam inside the ADF.
The receiving mode cannot be changed from
manual to other modes since the Distinctive Ring
mode is enabled.
The home position of the disc or photo cannot be
detected during scanning.
The head thermistor detected that the room
temperature is too high.
2-12
Error
Reference
Code
26, 27, 28,
2-23
29
20, 21, 22,
2-21,
23, 24, 25
2-22
26, 27, 28, 2-23
29
93
2-45
2-82
2-82
A1, 2F
2-46,
2-25
2-84
31, 38, 3C,
2-27,
82
2-29,
84, 8A, 8C
2-30,
2-41,
2-42,
2-43
2-53
90
2-44
2-82
A2, A3
2-46,
2-47
Confidential