Brother DCP-J552DW Service Manual page 139

Transferring faxes to a PC
■ Operating Procedure
The following procedure is done on the fax machine and your PC.
<Touch panel model>
(1) Press the [X] key to close the error message (if displayed).
(2) Press the
(3) Press the [All setting] key.
(4) Press the [Fax] key.
(5) Press the [Setup Receive] key.
(6) Press the [Memory Receive] key.
(7) Press the [PC-Fax Receive] key.
(8) When the message "Run PC-Fax on your computer." appears on the LCD, press [OK].
(9) <Windows XP, Windows Vista and Windows 7>
From your PC's start menu, select [All Programs]  [Brother] 
[(Model Name) MFC-XXXX]  [PC Fax Receiving]  [Receive]
<Windows 8>
From your PC's Brother Utilities, click the drop-down list and select your model name (if not
already selected).
Click [PC-FAX Receive] in the left navigation bar, and then click [Receive].
Do one of the following.
(10) Press [Yes]. If Fax Preview
up print option.
1
MFC-J870DW and MFC-J875DW only.
(11) Press the [Home] key.
<Rubber key panel model>
(1) Press the [Stop/Exit] key to chose the error message (if displayed).
(2) Press [ ] or [ ] to choose "Fax". Press [OK] key.
(3) Press [ ] or [ ] to choose "Set up Receive". Press [OK] key.
(4) Press [ ] or [ ] to choose "Memory Receive". Press [OK] key.
(5) Press [ ] or [ ] to choose "PC Fax Receive". Press [OK] key.
(6) The LCD shows the message "Run PC-Fax on your computer". Press [OK] key.
key.
1
is set to off, you will be asked if you want to also turn on the back
3-22
Confidential