Part 2: Ac7Z100 Core Board; Part 2.1: Ac7Z100 Core Board Introduction - Alinx ZYNQ7000 FPGA User Manual

file systems.
 40-pin expansion port
A 40-pin 2.54mm pitch expansion port can be connected to various
ALINX modules (binocular camera, TFT LCD screen, high-speed AD
module, etc.). The expansion port contains 1 channel 5V power supply,
2 channel 3.3V power supply, 3 way ground, 34 IOs port.
 JTAG debug port
A 10-pin 0.1 spacing standard JTAG ports for FPGA program download
and debugging. Users can debug and download the ZYNQ system
through the XILINX downloader.
 LED Light
10 LEDs; 3 LEDs on the core board, 7 LEDs on the carrier board. There
are 1 power indicator, 1 DONE configuration indicator, and 1 user
indicator on the core board. There are 1 power indicator, 4 user
indicators and 2 serial indicators on the backplane.
 Button
5 buttons; 1 reset button, 4 PL user buttons

Part 2: AC7Z100 core board

Part 2.1: AC7Z100 core board Introduction

AC7Z100 (core board model, the same below) FPGA core board, ZYNQ
chip is based on XC7Z100-2FFG900 of XILINX company ZYNQ7000 series.
The ZYNQ chip's PS system integrates two ARM CortexTM-A9 processors,
AMBA® interconnects, internal memory, external memory interfaces and
peripherals. The FPGA of the ZYNQ chip contains a wealth of programmable
logic cells, DSP and internal RAM.
The core
MT41J256M16HA-125 for a total capacity of 4GB. Two DDR3s are mounted on
9 / 61
ZYNQ FPGA Development Board AX7Z100 User Manual
board uses
Amazon Store: https://www.amazon.com/alinx
four Micron 512MB DDR3 chips