7: Control Via Can With Internal Acceleration And Deceleration Ramps - Eaton Cutler Hammer PowerXL DC1 E1 Series Parameter Manual

3.2.8 P-12 = 7: Control via CAN with internal acceleration and deceleration ramps
P-15 DI1
(terminal 2)
0 START
1 Not permissible
2 Not permissible
3 START
4 Not permissible
5 Not permissible
6 START
7 START
8 Not permissible
9 Not permissible
10 Not permissible
11 Not permissible
12 Not permissible
13 START
14 Not permissible
15 FWD
16 FWD
17 FWD
Table 16: P-12 = 7: Control via CAN with internal acceleration and deceleration ramps
DI2
(terminal 3)
No function
Select BUS REF/f-Fix1
Select BUS REF/AI1 REF
Select BUS REF/DIG REF
No function
Select f-Fix/BUS REF
Select f-Fix4/BUS REF
Select BUS REF/f-Fix4
DC1...E1 Variable Frequency Drives 11/16 MN040022EN www.eaton.com
3.2 Configuration of the control signal terminals
DI3/AI2
(terminal 4)
No function
EXTFLT
EXTFLT
EXTFLT
EXTFLT
Select Fire Mode/Normal OP
Select Fire Mode/Normal OP
Select Fire Mode/Normal OP
3 Control signal terminals
DI4/AI1
(terminal 6)
No function
No function
AI1 REF
No function
No function
Select f-Fix4/f-Fix2
No function
No function
23