About This Manual; Target Group; List Of Revisions - Eaton Cutler Hammer PowerXL DC1 E1 Series Parameter Manual

0 About this manual

0.1 Target group

0.2 List of revisions

This manual provides special information that is intended to enable you to
configure the parameters for a DC1...E1 variable frequency drive according
to your needs.
The details apply to the indicated hardware and software versions.
￫
For a general description (installation, technical data, etc.) of
DC1...E1 variable frequency drives, please refer to manual
MN040023EN ("Installation Manual").
This manual (MN040022EN) is intended for engineers and electricians.
Electrical engineering and physics-related knowledge and skills will be
required in order to be able to commission the corresponding devices.
We assume that you have a good knowledge of engineering fundamentals
and that you are familiar with handling electrical systems and machines, as
well as with reading technical drawings.
Publication date Page
11/16
08/16 –
DC1...E1 Variable Frequency Drives 11/16 MN040022EN www.eaton.com
Keyword
P-12 = 12: SWD control + setpoint value,
auto
Initial issue
0 About this manual
0.1 Target group
new modified deleted
✓
3