Troubleshooting
BEFORE PROCEEDING, READ AND UNDERSTAND THE SAFETY INFORMATION CONTAINED
This section is intended as a diagnostic aid only. For detailed repair or parts
replacement procedures, contact a qualified service company. Check the
following table for some solutions before calling a service technician.
Typical Start-up Problems
Possible Cause
Incorrect thermostat or humidistat
Changed settings on the thermostat
Unit Does not Start-up
Thermostat light is off
Possible Cause
Voltage switch not in correct position
No power to outlet
Unit not plugged in
LCDI tripped
Thermostat light is on
Possible Cause
Thermostat is not set up properly
38
WARNING
IN THE SAFETY SECTION OF THE WINE GUARDIAN MANUAL.
IMPORTANT
Solution
Check the thermostat and humidistat setup
for the application. Read the thermostat
troubleshoot guidelines in the Thermostat
Installation and Operating Instructions.
A common problem is not waiting long
enough for the internal timers to complete
their timed delay. Allow 5 minutes for
compressor to start.
Solution
Check position of voltage switch
Check circuit breaker and wiring
Plug in the unit
Reset
Solution
Check thermostat set up in the guide