Installation; Pre-Installation Test; Air Flow Diagram - Wine Guardian PRO Series Installation, Operation And Maintenance Manual

Installation

Sharp edges are present inside the Wine Guardian PRO Split System

Pre-installation Test

Test the system before installing it to check for non-visible shipping damage.
To test the Wine Guardian PRO Split System fan coil section:
 Set the system on the floor or a sturdy level surface.
 Plug in the system.
 Press the on/off switch to see if the control illuminates. This indicates the system
has power.
 A built-in timer may be present within the controller which prevents short
cycling and keeps the system from turning on right away. After a five-
minute period the fan should turn on and start to deliver air. Listen for any
unusual noise or vibration.

Air Flow Diagram

Fig. 1
27
CAUTION
SHARP EDGES
RISK OF SERIOUS INJURY
.