Table of Contents
Advertisement
<Menu>
<Preferences>
brightness
Invert Screen Colors
Select <On> to invert the display colors. Select <On> if the display is hard to view even after the brightness was
adjusted in <Contrast>.
Off
On
<Menu>
<Preferences>
<Off>
Millimeter/Inch Entry Switch
Select the unit of measurement.
Millimeter
Inch
<Menu>
<Preferences>
<Millimeter> or <Inch>
Notify to Check Paper Settings
You can set the machine so that, after you load the paper in the paper drawer, a pop-up screen is displayed
prompting you to confirm the paper loaded in the paper drawer is the same as the paper registered in the
paper settings.
Off
On
<Menu>
<Preferences>
or <Off>
Notify to Clean Original Scanning Area
When set to <On>, a message is displayed for dirt or soiling on the original scanning area.
Setting Menu List
<Display Settings>
<Apply>
<Display Settings>
<Display Settings>
<Display Settings>
*2
433
<Contrast>
Use <->/<+> to adjust the
<Invert Screen Colors>
<Millimeter/Inch Entry Switch>
<Notify to Check Paper Settings>
Select <On> or
Select
Select <On>
Advertisement
Table of Contents
