Configuring Copy Settings To Your Needs - Canon imageRUNNER 2204F User Manual

Hide thumbs Also See for imageRUNNER 2204F:

Table of Contents

Configuring Copy Settings to Your Needs

The default settings are the settings that are displayed whenever you turn ON the machine, or when you press

you register your frequently used settings as default settings, you can eliminate the need to configure the same

settings every time you make copies. In addition, you can also register combinations of multiple copy settings and use

them whenever you need them.

The machine comes pre-configured with factory default settings (

change and register the default settings according to your needs.

Setting Menu List(P. 420) ). You can

Change the copy ratio to 95% and register it as the

default setting. From now on, you can make copies

without changing the copy ratio.

Settings(P. 102)

Go to <Favorite Settings> and register the combination of

<Number of Copies> and <Finishing Type> turned

<Collate>. You can then easily use this setting

combination whenever you need it.

Frequently Used Copy Settings(P. 103)

Changing Default