Table of Contents
Advertisement
Checking whether the settings are correct
Make sure that the Remote UI screen can be displayed with your computer (
a computer is not available, you can check the connection by using the operation panel (
Network Connection(P. 322) ).
Testing the Network Connection
1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
●
If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap
<Apply>, and press
(P. 359)
3
Select <TCP/IP Settings>
4
Enter the IPv4 address of another device on the network, and tap <Apply>.
●
If a proper connection has been established, the result is displayed as shown above.
LINKS
Setting IPv6 Addresses(P. 323)
Viewing Network Settings(P. 326)
Network (imageRUNNER 2204F / 2204N / 2004N)
.
Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)
<IPv4 Settings>
322
Starting Remote UI(P. 399) ). If
<PING Command>.
Testing the
Advertisement
Table of Contents
