Configuring settings via the Remote UI
●
Start the Remote UI and log on in System Manager Mode. Click [Settings/Registration]
Management]
[Edit...] and specify the necessary settings on the displayed screen.
●
By using the Remote UI, you can register a variety of information, including contact information,
Administrator comments, the installation location of the machine, as well as to the settings that you can
register by using the control panel. The registered information can be viewed on the [Device Information]
page of the Remote UI.
Logging on to the machine
●
If you try to access <Network Settings> or <System Management
Settings> when only the System Manager ID is enabled, the following
logon screen is displayed:
Security
Checking System Manager Information(P. 408)
360
[System