Table of Contents
Advertisement
Setting Up Connection by Specifying Detailed Settings(P. 314)
The authentication method of the machine is set to <Shared Key>, but that of the wireless router is set to
"Open System."
●
Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Paper Size and Settings Mismatch
The paper size setting on the control panel does not match the loaded paper size.
●
Match the paper size setting specified in <Paper Settings> and the size of the paper that is actually loaded.
To use the loaded paper
Change the setting of <Paper Settings> to match the loaded paper size.
Specifying Paper Size and Type(P. 55)
If printing from a computer, check whether the paper size setting in the printer driver matches the loaded
paper size.
To load paper without changing the settings
Load the paper with the size that is set to <Paper Settings>.
Loading Paper(P. 40)
Specifying and registering new destinations is restricted.
Only destinations that are registered in the Address Book can be specified to send a fax or e-mail.
●
To enter a new destination with the control panel, or add or edit it in the Address Book, you need to set
<Restrict New Destinations> to <Off>. For more information, contact your Administrator.
Limiting Available Destinations (imageRUNNER 2204F)(P. 387)
The memory is full.
A fax could not be sent or received, or a document could not be scanned due to insufficient memory
space.
●
If a sending or printing job is queued, wait until the job is completed.
●
If a received document is stored to memory, print or delete it.
Storing Received Faxes into Memory (Memory Reception)(P. 141)
●
If sending a document with many pages, divide it into multiple sections.
●
If sending a fax, reduce the resolution to scan the document.
Adjusting Resolution(P. 129)
●
If scanning, change the file format to reduce its file size.
Configuring Storing Settings(P. 233)
Troubleshooting
497
Advertisement
Table of Contents
