Preparing To Use The Machine As A Scanner - Canon imageRUNNER 2204F User Manual

Preparing to Use the Machine as a Scanner

Make sure that the machine and your computer are connected and all software is installed. For how to check, see
"Getting Started" ( Manuals Included with the Machine(P. 596) ). To connect via a wireless or wired LAN, you must
register this machine in MF Network Scan Utility. Register by following the procedure below. This procedure is not
required if the machine and your computer are connected via USB.
The scan function is not available if the machine and your computer are connected in an IPv6 environment. Use
IPv4 or a USB connection.
1
Click in the system tray.
2
Select the check box for the machine, and click [OK].
● Up to ten computers can be connected at a time on a network to one product (scanner).
Using the Machine as a Scanner
218
1053-044