Table of Contents
Advertisement
●
Select [Flexible] to change the output size and the ratio of width to height. Drag the area you want to scan
on the preview image or enter values for width and height. If you specify the magnification percentage in
the [%] entry field on the right side of the width and height entry fields, the document is enlarged or
reduced for scanning.
[Data Size]
Displays the data size of the image when it is scanned with the set [Output Resolution] and [Output Size].
Adjusting Image Quality
Configure settings for improving the image quality, such as correction of scratches or faded colors on a photograph.
These settings are available if you select [Color] or [Grayscale] for [Color Mode] (
Documents and Color Mode(P. 244) ).
[Auto Tone]
Automatically adjusts the color tone of the image.
[Reduce Dust and Scratches]
Makes dust or scratches on the document less noticeable. [High] makes large scratches and dust less
noticeable, but may ruin details on the image.
[Fading Correction]
The setting is available if you select [Color] for [Color Mode]. Corrects faded colors on the document or
enhances the color saturation of dull-colored documents. [High] dramatically corrects the faded colors, but
may change the color tone of the entire image.
Using the Machine as a Scanner
247
Specifying Settings for
Advertisement
Table of Contents
