Table of Contents
Advertisement
Scanning Using an Application
The application must be compatible with TWAIN or WIA
your application.
*
TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is an
integrated standard in Windows.
1
Place the document(s).
The second or subsequent documents may not be scanned, or an error message may be displayed
depending on the application. In such a case, place and scan one document at a time.
2
From the application, select the start scan command.
●
The procedure for selecting the start scan command varies depending on the application. For more
information, see the instruction manual for your application.
3
Select the scanner driver for the machine.
●
Select ScanGear MF or WIA. If you select ScanGear MF, you can configure advanced scan settings.
4
Configure the scan settings as necessary.
●
For more information about ScanGear MF scan settings, see
Mode(P. 240) or
5
Click [Scan].
●
Scanning starts.
●
When scanning is complete, the scanned image is forwarded to an application.
Using the Machine as a Scanner
Scan the document by using an application. You can use Adobe Photoshop, Microsoft
Office Word, or other image-processing and word-processing applications. The
scanned image is directly loaded in the application, allowing you to edit or process the
image immediately. The following procedure varies depending on the application.
Placing Documents(P. 36)
Configuring Scan Settings in Advanced Mode(P. 243) .
*
. For more information, see the instruction manual for
Configuring Scan Settings in Simple
237
1053-049
Advertisement
Table of Contents
