Loading Envelopes in the Multi-Purpose Tray
Make sure to flatten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes
and which side is face up.
Before Loading Envelopes(P. 49)
Loaded Orientation(P. 50)
This section describes how to load envelopes in the orientation you want, as well as procedures that you need
to complete before loading envelopes. For a description of the general procedure for loading paper in the paper
drawer or multi-purpose tray, see
Multi-Purpose Tray(P. 46) .
Before Loading Envelopes
Follow the procedure below to prepare the envelopes before loading.
10 envelope at a time can be loaded in the multi-purpose tray. Follow steps 1 to 4 in the procedure below to
prepare the envelope for loading.
1
Close the flap of each envelope.
2
Flatten them to release any remaining air, and make sure that the edges are pressed
tightly.
Basic Operations
Loading Paper in the Paper Drawer(P. 42) or
49
1053-00U
Loading Paper in the