Miscellaneous Problems
See
Common Problems(P. 502) also.
Steam is Emitted from the Machine's Output Area.
●
Use only dry paper in the machine. Moisture evaporates from damp paper due to the heat generated
inside the fixing assembly (it is most likely to occur at low room temperatures). This is not a malfunction,
but you can prevent this by using a stack of new unopened paper. However, if you smell something
burning, immediately turn OFF the machine, unplug the power plug from the AC power outlet, and contact
your local authorized Canon dealer. Continued use may lead to a fire or electrical shock.
Water Droplets From in the Output Area.
●
Use only dry paper in the machine. Moisture evaporates from damp paper due to the heat generated
inside the fixing assembly (it is most likely to occur at low room temperatures). This is not a malfunction,
but you can prevent this by using a stack of new unopened paper. However, if you smell something
burning, immediately turn OFF the machine, unplug the power plug from the AC power outlet, and contact
your local authorized Canon dealer. Continued use may lead to a fire or electrical shock.
The Settings That You Specified Are Not Enabled or Saved.
●
If you turn OFF the machine immediately after changing settings via the operation panel, the settings may
not be stored in the machine. After changing the settings, wait for approximately five seconds before
turning OFF the machine.
Troubleshooting
514
1053-07R