Table of Contents
Advertisement
#018
A fax could not be sent since the recipient's machine did not respond because the line was busy or for
other reasons.
●
When the recipient's machine is turned OFF or the line is busy, a fax may not be sent. Ask the recipient to
check the machine status. When sending the fax overseas, insert pauses in the fax number.
Sending Faxes(P. 108)
#022
Sending of a fax from a computer is disabled.
●
To send a fax from a computer, you need to set <Allow Fax Driver TX> to <On>. For more information,
contact your Administrator.
Prohibiting PC Faxing (imageRUNNER 2204F)(P. 388)
A fax could not be forwarded because the specified destination was deleted from the Address Book.
●
Register the forwarding destination again. If the documents that failed to be forwarded remain in
memory, you can forward it again.
Registering in the Address Book (imageRUNNER 2204F)(P. 60)
#037
Memory is full.
●
If a sending or printing job is queued, wait until the job is completed.
●
If a received document is stored in memory, print or delete it.
Storing Received Faxes into Memory (Memory Reception)(P. 141)
●
If sending a document with many pages, divide it into multiple sections.
●
If sending a fax, reduce the resolution to scan the document.
Adjusting Resolution(P. 129)
#099
Printing, sending, or receiving was canceled.
●
When you cancel an operation, this error code is displayed, but this is not abnormal. Print, send, or receive
documents again as necessary.
#701
The specified department ID does not exist. Or, the PIN was changed.
●
Enter the correct department ID or PIN using the numeric keys (0 to 9), and then try executing the job
again.
Troubleshooting
500
Advertisement
Table of Contents
