Table of Contents
Advertisement
Setting the System Manager ID (imageRUNNER 2204F /
2204N / 2004N)
Register the System Manager ID, an ID that is intended exclusively for Administrators. You can also set a PIN for the
System Manager ID. If this ID is enabled, you can access <Network Settings> and <System Management Settings> only
when the System Manager ID and PIN have been entered correctly. The ID and PIN are both set to "7654321" as
default. Change them for security purposes. The System Manager ID settings information is critical to the security of
the machine, so make sure that only Administrators know the System Manager ID and PIN.
1
Tap <Menu> in the Home Screen.
2
Tap <System Management Settings>.
3
Select <System Manager Information Settings>
4
Specify the System Manager PIN.
●
Specify the<System Manager ID>, and then specify the System Manager PIN>.
●
Enter a number of up to seven digits, and tap <Apply>.
●
When <PIN (Confirm)> is displayed, enter the PIN once again to confirm.
●
You cannot set a PIN that consists only of zeros, such as "00" or "0000000".
●
To disable the PIN, press
Setting the System Manager Name
1
Tap <System Manager Name>.
2
Enter up to 32 characters for the System Manager Name, and tap <Apply>.
Security
to erase the PIN (leave the text box blank), and tap <Apply>.
359
<System Manager ID and PIN>.
Entering Text(P. 34)
1053-05R
Advertisement
Table of Contents
