Table of Contents
Advertisement
Setting IPv4 Address
Setting IPv4 Address(P. 320)
Testing the Network Connection(P. 322)
Setting IPv4 Address
1
Tap <Menu> in the Home Screen.
2
Tap <Network Settings>.
●
If a screen for entering a System Manager ID and PIN is displayed, enter the System Manager ID and PIN, tap
<Apply>, and press
(P. 359)
3
Select <TCP/IP Settings>
4
Configure IP address settings.
<Auto Acquire>
Select to automatically assign an IP address via a protocol such as DHCP. When <Auto Acquire: On> is
displayed, automatic addressing is enabled.
<Manually Acquire>
Select to configure the IP address settings by manually entering an IP address. In order to select this
option, <Auto Acquire> must be set to <Off>.
<Check Settings>
Select when you want to view the current IP address settings.
Automatically assigning an IP address
1
Select <Auto Acquire>
Network (imageRUNNER 2204F / 2204N / 2004N)
The machine's IPv4 address can be either assigned automatically by a dynamic IP
addressing protocol, such as DHCP, or entered manually. When connecting the
machine to a wired LAN, make sure that the connectors of the LAN cable are firmly
inserted into the ports (
network connection if necessary.
.
Setting the System Manager ID (imageRUNNER 2204F / 2204N / 2004N)
<IPv4 Settings>
<Select Protocol>.
320
Connecting to a Wired LAN(P. 303) ). You can test the
<IP Address Settings>.
1053-051
Advertisement
Table of Contents
