Canon imageRUNNER 2204F User Manual page 260

Hide thumbs Also See for imageRUNNER 2204F:
Table of Contents

Advertisement

[Scan] Tab
[Scan without Using ScanGear's Window]
When you scan the document by using an OCR software or other application, the ScanGear MF screen may
not be displayed. In such a case, the document is scanned with the setting of the application applied.
However, if the application does not have the following settings, enable them here so that these settings
are applied for scanning.
[Color Mode (Text and Table)]
If the application settings are specified to scan documents in color, those settings are replaced and
documents are scanned with the ScanGear MF color mode set to [Color Mode (Text and Table)].
[Text Enhanced]
If the application settings are specified to scan documents in black and white, those settings are
replaced and documents are scanned with the ScanGear MF color mode set to [Text Enhanced].
[Automatically Quit ScanGear after Scanning]
The [ScanGear MF] screen automatically closes after scanning is complete. The screen may automatically
close with some applications regardless of this setting.
[Color Settings] Tab
[Color Correction]
Select the color correction method.
[Recommended]
Color tone is vividly reproduced on a computer display. This setting is recommended for most color
corrections.
[Color Matching]
Color is adjusted so that the color tone on the display comes closer to that on the printed result. This
setting is available if you select [Color] for [Color Mode] (
Color Mode(P. 244) ).
Using the Machine as a Scanner
Configure the settings that are applied when you scan a document by using
an application, and the settings for ScanGear MF operations.
Configure advanced color and brightness settings, such as color matching
and gamma correction.
252
Specifying Settings for Documents and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 2204nImagerunner 2004nImagerunner 2004

Table of Contents