Easytouch Indoor Control And Wireless Control Panel (Optional) - Pentair EasyTouch PNP 5 Owner's Manual

Controls

EasyTouch Indoor Control and Wireless Control Panel (Optional)

The EasyTouch Wireless or the Indoor Control Panel allows you to control your pool and spa daily operations
from around your pool area or inside your home. Use the "P" (Pool) and "Spa" (Pool) buttons to heat and
filter your pool and spa. The Indoor Control Panel connects to the EasyTouch motherboard in the load
center. For more information refer to the EasyTouch Indoor Control Panel User's Guide (P/N 520616) and
the EasyTouch Wireless Control Panel User's Guide (P/N 520688).
Pool (Lo-Temp) Button: Switches
the filter pump on, rotates valve
actuator (to isolate pool water
from spa water), and switches
heater on.
Lo-Temp (EasyTouch single body
system) sets the low tempera-
ture settings for the pool (see
page 41)
For details about the
control panel LCD sta-
tus messages,
see page 8
Pool (Lo-Temp) Button:
Switches the filter pump
on, rotates valve actua-
tor (to isolate pool water
from spa water), and
switches heater on.
Lo-Temp (EasyTouch
single body system) sets
the low temperature
settings for the pool.
AUTO
SPA
AIR
MON 09:30 AM
EasyTouch indoor control panel (EasyTouch 8) - (P/N 520549)
AUTO
SPA
AIR
MON 09:30 AM
EasyTouch wireless control panel (EasyTouch 8) - (P/N 520547)
Spa (Hi-Temp) Button: Switches the filter
pump on, rotates valve actuator (to isolate
spa water from pool water), and switches
the heater on. Hi-Temp (EasyTouch single
body system) sets the high temperature
settings for the spa.
HEATER
25°C / 35°C
20°F
HEATER
25°C / 35°C
20°C
POWER ON
Page 24
Circuit LED
Circuit name label
Seven user defined
auxiliary circuits.
Buttons switch the
assigned circuit
function on/off (12
hour time-out). Down
arrow button can also
be used for an "ex-
tra" auxiliary circuit if
solar equipment is not
being used
Spa (Hi-Temp) But-
ton: Switches the filter
pump on, rotates valve
actuator (to isolate spa
water from pool wa-
ter), and switches the
heater on. Hi-Temp
(EasyTouch single
body system) sets the
high temperature set-
tings for the
spa.
Seven user defined
auxiliary circuits.
Buttons switch the
assigned circuit
function on/off
(12 hour time-out)
Down arrow button
can also be used for
an "extra" auxil-
iary circuit if solar
equipment is not
being used