Pentair EasyTouch PNP 5 Owner's Manual page 59

Diagnostics Menu: Chlorinator
Displays the current IntelliChlor chlorination system status. For more information, refer to the IntelliChlor
Electronic Chlorine Generator User's Guide (P/N 520589).
Chlorinator

Salt Level:3200ppm
Status:
[OK-NO ERRORS]

Water Temp
Displays the current water temperature for the pool and spa.
Water Temperature

25° C

Solar Temp
Displays the current solar temperature.
Solar Temperature

55° C

Menu: Press this button to return to the Settings menu options. Press the button
again to return to the main menu options or press again to return to the main
screen.
Displays the current salt level. Values from 0 to 12750 ppm in 50 ppm
SALT LEVEL:
increments.
IntelliChlor Status messages:
IntelliChlor is in "Super Chlorination mode (see page 35 for
SUPER CHLORINATE:
details)
Check cable from IntelliChlor to EasyTouch motherboard.
COM LINK ERROR:
Check IntelliChlor electrolytic cell controller. Refer to IntelliChlor
Check FLOW/PCB:
User's Guide troubleshooting information.
Add salt to pool water. The water salt level is between 2500 ppm and
LOW SALT:
2900 ppm. The IntelliChlor will continue to produce chlorine at a reduced level.
Not enough salt in pool. The water salt level has fallen below 2500
VERY LOW SALT:
parts per million (ppm). IntelliChlor will not produce chlorine until additional salt
is added manually.
Check IntelliChlor electrolytic cell controller. Refer to IntelliChlor
HIGH CURRENT:
User's Guide troubleshooting information..
Cell has calcium build up and requires cleaning. Refer to IntelliChlor
CLEAN CELL!!:
User's Guide for cleaning instructions.
Check IntelliChlor electrolytic cell controller. Refer to IntelliChlor
LOW VOLTAGE:
User's Guide troubleshooting information.
IntelliChlor is in normal operating mode.
OK - NO ERRORS:
Press the Menu button to return to the Settings menu options. Press the button
again to return to the main menu options or press again to return to the main
screen.
Press the Menu button to return to the Settings menu options. Press the button
again to return to the main menu options or press again to return to the main
screen.
Page 59
Diagnostics