Accessing The Easytouch Motherboard - Pentair EasyTouch PNP 5 Owner's Manual

Accessing the EasyTouch Motherboard

The EasyTouch motherboard provides connectors for the auxiliary relays, valve actuators and
sensors. To access the motherboard connectors, fold down the main control panel.
To access the motherboard connectors:
1. Loosen the two retaining screws securing from the top edge of the control panel.
2. Fold down the control panel to access the rear of the motherboard for the electrical connec-
tions.
3. Proceed with:
• Installing the Valve Actuator, page 16
• Installing and Connecting Temperature Sensors, page 17
• Connecting the Heater, page 18
4. After electrical connections have be completed, close the control panel and tighten the two
retaining screws.
Retaining
screw
Electrical Installation
Page 15
Retaining
screw
Control panel
(fold down to access
motherboard)