Adjusting The Paper Guides; Automatic Paper Guide Adjustment; Manual Paper Guide Adjustment - Riso ComColor FT Series Troubleshooting Manual

Adjusting the Paper Guides

Adjust the position of the paper guides of the optional auto-control stacking tray.
^ ^

Automatic Paper Guide Adjustment

^ ^
• Normally, use [Auto].
[Auto]
The position of the paper guides is automatically
adjusted to fit the paper size.
^ ^

Manual Paper Guide Adjustment

You can widen or narrow the paper guides beyond
the position set in [Auto].
You can adjust the side and end paper guides
separately.
[Wider]
The paper guides move in 1 mm (0.04")
increments toward the outside of the stacking tray.
[Narrower]
The paper guides move in 1 mm (0.04")
increments toward the inside of the stacking tray.
^ ^
• You can use the paper guides open button on
the auto-control stacking tray to manually move
the guides when removing paper.
1
Touch [Maintenance] on the [Home]
screen.
2
Touch [Paper Guide Control].
The [Paper Guide Control] screen is displayed.
3
Adjust the positions of the paper
guides.
• To reset the adjustment value to 0 mm, touch
[Auto].
• The adjustment value is also reset to 0 mm when
the [Power] key on the operation panel is pressed
to restart the machine, when the [Reset] key is
pressed, or when the paper size is changed.
4
Touch [Close].
56
ComColor FT Series Troubleshooting Guide