Problem See - Riso ComColor FT Series Troubleshooting Manual

Images are bright or dark.
Duplex printing cannot be performed using the paper loaded in the standard tray.
The sent data became a broken job.
The colors of a barcode background or nearby images cannot be printed out.
The layout order is not correct.
When the imposition is specified, the page numbers are not stamped on both sides of paper.
Part of the original (image) is missing in the formed poster.
Part of the poster is formed with one or more blank pages. / The printed image of the poster is
not formed at the center.
Cannot properly stick the sheets of printed paper to form a poster. / Failed to cut along the
cutting lines (register marks).
Cannot properly stick the sheets of printed paper to form a poster.
Troubleshooting for Copying
Part of the original is missing in the copied data.
Duplex copying was performed, but the back of one or more pages is blank.
Duplex copying cannot be performed for the paper loaded in the standard tray.
Cannot collectively copy multiple originals as one job.
The paper is stapled at the wrong position.
Troubleshooting for Scanning
There is no scanned data on the scan screen of the RISO Console.
Part of the original is missing in the scanned data.
The color mode is set to [Auto], but the machine does not identify color originals automatically.
The scanned data cannot be saved on a computer on the network.
Troubleshooting for Storage and USB
Files saved on a USB flash drive are not displayed on the printer.
Cannot print properly on irregular sized paper.
Paper is loaded but the "Set paper." error message is displayed.
The results of color printing are poor.
Duplex printing cannot be performed using the paper loaded in the standard tray.
Part of the original is missing in the copied data.
Part of the original is missing in the scanned data.
The color mode is set to [Auto], but the machine does not identify color originals automatically.
Troubleshooting for the Multifunction Finisher or Face Down Finisher
The multifunction finisher or face down finisher does not operate.
When you copy the original, the paper is stapled at the wrong position.
Staples do not penetrate well, e.g., they bend or crush. / Paper is not output from the face down
finisher.
A staple is jammed inside the machine.
Sheets come out loosely stacked on the face down finisher. / Printouts are curled back.
20
Problem
p.36
p.36
p.36
p.37
p.37
p.37
p.37
p.37
p.37
p.38
p.39
p.39
p.39
p.39
p.40
p.41
p.41
p.41
p.41
p.42
p.42
p.42
p.42
p.43
p.43
p.43
p.43
p.44
p.44
p.44
p.44
p.44
ComColor FT Series Troubleshooting Guide
See