Cleaning The Punching Box; Disposing Of The Punching Trash - Riso ComColor FT Series Troubleshooting Manual

Cleaning the Punching Box

When the punching box becomes full of punching trash, printing stops and a message appears on the touch
panel. Use the following procedure to remove the punching box and dispose of the punching trash.
• When removing the punching box, be sure to dispose of all punching trash. If punching trash remains
inside the punching box, the punching box may become full before the message for replacement
appears, causing a malfunction.
^ ^
• Be sure to perform this task with the power of the machine turned ON. If the machine is not turned
ON, the machine will not recognize that the punching box is empty. When the machine is in the sleep
mode, press the [Wake Up] key on the operation panel before use.

Disposing of the Punching Trash

1
Open the cover.
2
Pull the punching box toward you to
remove it.
3
Dispose of all punching trash.
4
Return the punching box back to its
original position.
5
Close the cover.
ComColor FT Series Troubleshooting Guide
3
61