Safety Notices; General Safety Notices; Safety Standards; Intended Use - Leuze electronic AMS 301i Manual

2

Safety notices

2.1

General safety notices

Documentation
All entries in this technical description must be heeded, in particular those in section "Safety
notices". Keep this technical description in a safe place. It should be available at all times.
Safety regulations
Observe the locally applicable legal regulations and the rules of the employer's liability
insurance association.
Repair
Repairs must only be carried out by the manufacturer or an authorized representative.
2.2

Safety standards

The devices of the series AMS
accordance with the applicable safety standards. They correspond to the state of the art.
2.3

Intended use

The AMS 301i... device series is an absolute measuring system based on laser technology.
The devices use a visible optical laser to measure distances of up to 300 m contactlessly.
The laser is designed so that distance measurements are made against a reflector.
Attention!
The protection of personnel and the device is guaranteed only if the device is operated in a
manner corresponding to its intended use.
Areas of application
The AMS 301i... is suitable for the following areas of application:
• Distance measurements for determining the position of automated, moving plant
components such as:
- Travel and lifting axes of high-bay storage devices
- Gantry crane bridges and their trolleys
- Repositioning units
- Lifts
- Electroplating plants
Leuze electronic
301i were developed, manufactured and tested in
i
AMS 301
Safety notices
6