Language Selection Menu - Leuze electronic AMS 301i Manual

Other submenu
Table 8.5:
Level 3
Heating control
Display
illumination
Display contrast
Service RS232
8.3.3

Language selection menu

Language selection
o Deutsch
English
o Español
o Français
o Italiano
There are 5 display languages available:
• German
• English
• Spanish
• French
• Italian
The AMS 301i
To change the language, no password needs to be entered nor must password enabling
be activated. The display language is a passive operational control and is, thus, not a
function parameter, per se.
Leuze electronic
Other submenu
Level 4 Level 5 Selection/configuration option
Description
Standard (10° C ... 15° C)/Extended (30° C ... 35° )
Defines a switch-on/switch-off range for the heating control.
The extended switch-on/switch-off range for heating may provide relief
in the event of condensation problems.
There is no guarantee that no condensation will occur on the optics in the
extended switch-on/switch-off range due to the limited heating capacity.
This parameter is available as standard, but functions only for devices
with integrated heating (AMS 301 ... H).
10 minutes/ON
Display illumination is switched off after 10 minutes or, if the parameter
is set to "ON", illumination is always on.
Weak/Medium/Strong
The display contrast may change at extreme temperature values. The
contrast can subsequently be adapted using the three levels.
Baud rate 57.6 kbit/s / 115.2 kbit/s
The service interface is only available to Leuze internally.
Format 8,e,1 / 8,n,1
The service interface is only available to Leuze internally.
is delivered from the factory with the display preset to English.
Display and control panel AMS 301i
i
AMS 301
Standard
Standard
10 min.
Medium
115.2 kbit/s
8,n,1
44