Table of Contents
Advertisement
Installation and mounting
5
Installation and mounting
5.1
Storage, transportation
Attention!
When transporting or storing, package the device so that it is protected against collision and
humidity. Optimum protection is achieved when using the original packaging. Heed the
required environmental conditions specified in the technical data.
Unpacking
Check the packaging for any damage. If damage is found, notify the post office or shipping
agent as well as the supplier.
Check the delivery contents using your order and the delivery papers:
• Delivered quantity
• Device type and model as indicated on the nameplate
• Brief manual
The name plate provides information as to what AMS
information, please refer to chapter 11.2.
Name plates
Figure 5.1:
Notice!
Please note that the shown name plate is for illustration purposes only; the contents do not
correspond to the original.
Save the original packaging for later storage or shipping.
15
Device name plate using the AMS 300 as an example
301i
i
AMS 301
type your device is. For specific
Leuze electronic
Advertisement
Table of Contents
