Mounting The Ams 301 - Leuze electronic AMS 301i Manual

If you have any questions concerning your shipment, please contact your supplier or your
local Leuze electronic sales office.
Observe the applicable local regulations when disposing of the packaging materials.
5.2 Mounting the AMS
Figure 5.2:
The AMS 301i
plane-parallel, flat walls or system parts. For error-free position measurement, there must
be an unobstructed line-of-sight connection between the AMS
Use M 5 screws to fasten the laser measurement system. Secure the screws with a toothed
lock washer to protect against loosening caused by vibrations.
Leuze electronic
301i
Mounting the device
and the corresponding reflector are mounted on two mutually opposing,
B
i
AMS 301
Installation and mounting
A M 5 screw for
A
alignment
B Knurled nut and
WAF 4 nut for
securing
C Optical axis
A
C
301i and the reflector.
16