Leuze electronic AMS 301i Manual page 49

Parameter enabling
o
Viewing and editing parameters
As long as parameter enabling is activated, the entire AMS
Communication between the control and the AMS
active when parameter enabling is active.
Notice!
Changes to parameters via display entry have immediate effect.
If a password was stored, parameter enabling is not possible until this password is entered,
see "Password for parameter enabling" below.
Password for parameter enabling
Parameter entry on the AMS
With the AMS 301i, the password is entered via the display. If parameter enabling has been
activated after successfully entering the password, parameters can be changed via the
display.
Notice!
The master password 2301 can enable the AMS
Leuze electronic
OFF
ON
ESC ESC
301i
Display and control panel AMS 301i
Press the enter button to switch on parameter
enabling.
The PWR LED illuminates orange; the display is
inverted. You can now set the individual parameters
on the display.
Press the ESC button twice to return to the
Parameter menu.
301i
can be protected with a four-digit numerical password.
301i
i
AMS 301
301i display is inverted.
via the RS 485 interface is also
at any time.
46