Table of Contents
Advertisement
Display and control panel AMS 301i
8.3.4
Service menu
Service
Status messages
Diagnostics
Expanded diagnostics
A more detailed description of the individual functions can be found in chapter 10.
8.4
Operation
Described here is an operating process using parameter enabling as an example.
Parameter enabling
During normal operation parameters can only be viewed. If parameters are to be changed,
the ON menu item in the Parameter -> Parameter handling -> Parameter enable
menu must be activated. To do this, proceed as follows:
Parameter
Parameter handling
o Parameter enabling
o
Parameter enabling
o
o ON
45
Parameter handling
RS 485
Position value
I/O
Other
Password
Parameters to default
OFF
In the main menu, press the enter button to enter the
Parameter menu.
Use the
handling menu item.
Press the enter button to enter the Parameter
handling menu.
In the Parameter handling menu, use the
buttons to select the Parameter enabling
menu item.
Press the enter button to enter the Parameter
enabling menu.
In the Parameter enabling menu, use the
buttons to select the ON menu item.
i
AMS 301
buttons to select the Parameter
Leuze electronic
Advertisement
Table of Contents
