Eclipse ETEK 5 User Manual page 2

• Please read and understand all instruction manuals before use.
• The Eclipse ETEK5 is not a toy. PAINTBALL SAFETY RULES MUST BE
FOLLOWED AT ALL TIMES.
• Careless or improper use, including failure to follow instructions and
warnings within this User Manual and attached to the ETEK5 could cause
death or serious injury.
• Do not remove or deface any warnings attached to the ETEK5.
• Paintball industry standard eye/face/ear and head protection designed
specifically to stop paintballs and meeting ASTM standard F1776 (USA)
or CE standard (Europe) must be worn by the user and any person within
range. Proper protection must be worn during assembly, cleaning and
maintenance.
• Hearing protection should be worn.
• Never shoot at a person who is not wearing proper protection.
• Never look directly into the barrel of the marker. Accidental discharge into
the eyes may cause permanent injury or death. Never look into the barrel or
breech area of the ETEK5 whilst the marker is switched on and able to fire.
• Keep the ETEK5 switched off until ready to shoot.
• Treat every marker as if it is loaded and ready to fire.
• The electronic on/off button is the marker's disabling device, also known as
a safety, which prevents the marker from firing. Always switch off the marker
when not in use.
• Always fit a barrel-blocking device to the ETEK5 when not in use.
2 ETEK5 MANUAL
• Always remove all paintballs from the ETEK5 when not in use on the field
of play.
• Never point the ETEK5 at anything you do not intend to shoot.
• Do not shoot at persons within close range.
• Do not field strip or remove any parts while the marker is pressurised.
• Do not pressurise the ETEK5 without all the components of the marker
correctly installed, as high-pressure gas may be emitted.
• Do not fire the ETEK5 without the bolt correctly installed.
• Never put your finger or any foreign objects into the paintball feed tube of
the ETEK5.
• Never allow pressurised gas to come into contact with any part of your body.
• Always remove the first stage regulator and relieve all residual gas pressure
from the ETEK5 before disassembly.
• Always remove the first stage regulator and relieve all residual gas pressure
from the ETEK5 for transport and storage.
• Always follow guidelines given with your first stage regulator for safe
transportation and storage.
• Always store the ETEK5 in a secure place.
• Persons under 18 years of age must have adult supervision when using or
handling the ETEK5.
• Observe all local and national laws, regulations and guidelines.